Deactivation Pad
- Dimensions: 40 cm (15.7″) x 28 cm (11″) x 2.5 cm (.98″)
- Frequency: 8.2 MHz
- Power Input: 12VAC 200mA
- Deactivation Distance: 4×4 cm Label 20 cm 5×5 cm Label 20 cm
- Function
- Specifications
- Description
- Additional information
- Reviews (0)
- Dimensions: 40 cm (15.7″) x 28 cm (11″) x 2.5 cm (.98″)
- Frequency: 8.2 MHz
- Power Input: 12VAC 200mA
- Deactivation Distance: 4×4 cm Label 20 cm 5×5 cm Label 20 cm
The Universal Deactivator is an instrument used to deactivate the adhesive RF labels at the point of sale.
A low power transceiver detects a label when it enters the detection area. A signal is then sent to the deactivation unit, which will then send out a deactivation signal. Ultimately, the deactivation signal deactivates the label in 2 microseconds. An audible beep indicates that the label has been permanently deactivated.
- Dimensions: 40 cm (15.7″) x 28 cm (11″) x 2.5 cm (.98″)
- Frequency: 8.2 MHz
- Power Input: 12VAC 200mA
- Deactivation Distance: 4×4 cm Label 20 cm 5×5 cm Label 20 cm
Specifications:
- RF Deactivator
- 7.6MHz- 8.8MHz
- 120pcs/min
- 25cm
- 20cm
Description
The Universal Deactivator is an instrument used to deactivate the adhesive RF labels at the point of sale.
A low power transceiver detects a label when it enters the detection area. A signal is then sent to the deactivation unit, which will then send out a deactivation signal. Ultimately, the deactivation signal deactivates the label in 2 microseconds. An audible beep indicates that the label has been permanently deactivated.
Additional information
Weight | 23 kg |
---|---|
Dimensions | 12 × 24 × 35 in |
Color | Black, Green, Indigo |
Size | Large, Medium, Small |
Be the first to review “Deactivation Pad” Cancel reply
Related Products
-
0 out of 5
TD-7421AS
Laser Clarity Document Solution
10-ppm Laser Printing (A4)
Delivers crisp laser printouts at fast rate of 10 pages per minute.
600 x 600 dpi Printing Resolution
Clear and crisp printouts are available for printing and copying.
Caller ID Compatible*1
You can check the caller’s name and / or number on the LCD.
Super G3 Fax with 33.6 kbps Modem
Transmits the document in approx. 4 seconds*2 for reducing the cost.
250-Sheet Paper Tray
Large-capacity paper tray holds up to 250 pages for high-volume printing.
150-Page Document Memory*2
Built-in memory stores incoming or outgoing documents convenient for broadcasting documents to multiple locations or for out-of-paper reception (up to 150 pages for transmission, up to 100 pages for reception).
Dual Access Operation
Allows two operations to be performed simultaneously. For instance, while a laser fax is busy sending or receiving a memory based fax, you can store additional documents to send later.
Error Correction Mode (ECM)
Error Correction Mode assures clear transmission of document by checking line by line.
Broadcasting Transmission
Allows you to send multiple documents to multiple locations in simple operation. It gives 3 groups (20 locations for each). Manual registration is also available for 1 of 3 groups.
-
0 out of 5
Conventional heat detectors TS/TR
Main characteristics
Static / Elevation of T°
Lockable
Standard EN54-5
1 remote alarm indicator output
Cable section max 2,5mm² -
0 out of 5
LINKCOMN CAT 6 U/UTP Cable
Category 6 U/UTP Cable | LC-C6FB305
• Qualified Against ANSI/TIA-568-C.2 and ISO/IEC11801• 4 Pairs Shielded Twisted Pair Wires• AWG 23 Solid Conductor• PE Insulation• Aluminum Polyester Foil• PE Central Cross Separator• PVC Jacke -
0 out of 5
EAS-Electronic Article Surveillance RF MONO
Electronic article surveillance (EAS) is a deterrence loss prevention system used by retailers to deter shoplifting. EAS involves the use of electronic security towers(EAS antenna) and electronic security tags. Hard tags or Sticker tags(security labels) are placed on items throughout the store manually or are applied when merchandise is made and are disabled at check-out by either removing the hard tag using a detacher or by scanning label tags over a electronic label deactivator. If the tag is not disabled it will activate the alarm pedestals, which are generally located at the exit of a retail store. EAS tags & labels are extremely effective in deterring amateur shoplifting, but most professionals require a combination of hard tags, labels, and ink tags to keep them in check.
-
0 out of 5
Conventional Smoke Detector (SD3) OC05
Main characteristics
Photoelectric scattering (Tyndall effect)
1 remote alarm indicator output
Lockable
Standard EN54-7
Cable section max 2,5mm²
12V version
Reviews
There are no reviews yet.